- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Plastic Testing Equipment
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Vibration Meter
- Push Pull Gauge
- Data Logger / Data Logging Instrument
- Digital Tachometer
- Digital Handheld Stroboscope
- Laser Range & Angle Finder
- Laser Distance Meter
- Gauss Meter
- Inspection Mirror
- Welding Gauge
- Adhesion Tester
- Cable Length Measuring Device
- Refractometer
- Rotating Analysis
- TDS
- View All
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+603-9054 6939
+6012-499 2103
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
+6013-399 2103
sales@redmarkindustry.comchuin@redmarkindustry.com
PBBT-1 PET Bottle Burst Tester
| Previous | 1 / 3 | Next |
PBBT-1 PET Bottle Burst Tester (Equipmentfor Controlof Resistanceto Expandand Explosionof PET Bottle)
For PET bottles-Simulating filling process
PBBT-1PET Bottle Burst Tester is a specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly used. Users can choose the test method basing on the requirement. The PBBT-1is capable to test the capacity of resilience under certain pressure or the rupture test of the PET bottle.
Through the reproduction of the pressurization, the process has been linearized and it increases to the predetermined point or the point of bursting.
After selecting the test program, the cycle will start automatic ally depending on the settings. The touch screen displays the pressure value in real time and record the maximum pressure and burst pressure.
Modes details
Fill ramp mode
The filling ramp modes designed to simulate the situation of filling lines of PET bottles. Under this mode, the PET bottles are pressurized rapidly to the initially preset pressure and maintained for a given time(for example13 seconds). Then continue to increase the pressure with a speed of0.1 bar/suntil the outbreak of the bottle or reaching the max pressure or volume. Preset parameter includes: initial screening pressure, maximum pressure, and expansion volume limit.
.jpg)
Test curve of “Fill ramp mode”
Burst mode:
Under this mode, PET bottle will be pressurized rapidly to the initially preset pressure and maintained for a predefined period.
.jpg)
Test curve of “Burst mode”
.jpg)
Test curve of “Custom mode”
Specifications
Optional parts:
.jpg)
Water Recycling System (Optional)
.jpg)
PABT with Hot Water Spraying System (Optional)
.jpg)
Additional Booster (Optional)
.jpg)
“QualiBurst” software forPBBT-1 (Optional)
.jpg)
Compatible clamping system (Optional)
For PET bottles-Simulating filling process
PBBT-1PET Bottle Burst Tester is a specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly used. Users can choose the test method basing on the requirement. The PBBT-1is capable to test the capacity of resilience under certain pressure or the rupture test of the PET bottle.
Through the reproduction of the pressurization, the process has been linearized and it increases to the predetermined point or the point of bursting.
After selecting the test program, the cycle will start automatic ally depending on the settings. The touch screen displays the pressure value in real time and record the maximum pressure and burst pressure.
Characteristics
- Standard equipment for the PET bottle industry.
- 3internationaltest methods are available
- PLC integrated&Touch screen control
- Automatic clamping and filling system
- Can store 10 operators and 30 products
- User defines the product lot number and sequence number
- Display curves of pressure and volume expansion during the test
- Monitors and records the temperature of the water during the test
- Applicable to 2.5 L bottle(consult us for bigger size)
- Stainless steel design ensures the durability of tester
- RS232Cdata output: connected to either printer or software
- Integrated calibration function
Modes details
Fill ramp mode
The filling ramp modes designed to simulate the situation of filling lines of PET bottles. Under this mode, the PET bottles are pressurized rapidly to the initially preset pressure and maintained for a given time(for example13 seconds). Then continue to increase the pressure with a speed of0.1 bar/suntil the outbreak of the bottle or reaching the max pressure or volume. Preset parameter includes: initial screening pressure, maximum pressure, and expansion volume limit.
Test curve of “Fill ramp mode”
Burst mode:
Under this mode, PET bottle will be pressurized rapidly to the initially preset pressure and maintained for a predefined period.
Test curve of “Burst mode”
Custom mode:
Under this mode, user is able to create the pressure curve to meet the particular conditions of control. Users can define the pressure curve by steps, after the adjustment is made, the corresponding curve will be displayed on the user interface.
Under this mode, user is able to create the pressure curve to meet the particular conditions of control. Users can define the pressure curve by steps, after the adjustment is made, the corresponding curve will be displayed on the user interface.
Test curve of “Custom mode”
Specifications
- Measuring range: 0 - 20 bar
- Resolution:0.1 bar
- Sample range: Up to 2.5 L bottle
- Expansion in volume: Up to 2 L
- Power supply:115/230V,50 - 60Hz
- Pressurerequired:3barwater/ 20bar air source
- Temperature range: 0 to 50 °C
- Rear Panel: RS232 serial output
- Dimensions:740 (L) ×500 (W) ×920 (H)mm
- Net weight: 70 kg
Optional parts:
- Water recycling system
- Mini printer
- Calibration pack (including high accuracy pressure gauge for pressure calibration / calibration graduated flask / spacer)
- Data management Software
- PABT version with hot water spraying system
Water Recycling System (Optional)
PABT with Hot Water Spraying System (Optional)
Additional Booster (Optional)
“QualiBurst” software forPBBT-1 (Optional)
Compatible clamping system (Optional)