- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Plastic Testing Equipment
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Vibration Meter
- Push Pull Gauge
- Data Logger / Data Logging Instrument
- Digital Tachometer
- Digital Handheld Stroboscope
- Laser Range & Angle Finder
- Laser Distance Meter
- Gauss Meter
- Inspection Mirror
- Welding Gauge
- Adhesion Tester
- Cable Length Measuring Device
- Refractometer
- Rotating Analysis
- TDS
- View All
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
chuin@redmarkindustry.com
Multifunction Abrasion Scrub Tester
Previous | 7 / 14 | Next |
Moreover, this machine use touch screen to operate, user can set all required test parameters directly through touch screen, and also can check its working status at any time. Very easy and convenient to operate it.
Standards:
ISO 11998 《 Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings》
ASTM D 2486 《 Standard Test Methods for Scrub Resistance of Wall Paints》
ASTM D 3450 《Standard Test Method for Washability Properties of Interior Architectural Coatings》
ASTM D 4213 《Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss》
ASTM D 4828 《Standard Test Methods for Practical Washability of Organic Coatings》
ASTM D 5402 《Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs》
ASTM D 4752 《Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub》
ASTM D 7835《Standard Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing
Machine》
DIN EN 13300《Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings》
Features:
◆ With double working channels, each channel is equipped with a separate container for scrub medium .
Operator can use two different type mediums to do two different tests, also can do wet abrasion and dry abrasion test at the same
time.
◆ Working speed can be set from 5-95 times/minutes freely;Working distance can be set from 0-300mm freely, meet with different
standards.
◆ Push-rod design for reciprocating motion, thus working speed is more stable and more even and can get more reliable test results.
◆ With peristaltic pump, operator can set and control precisely scrub medium flow
◆ Installing and dismantling test panels or replacing different abrasion heads is more convenient and faster.
◆ All machine is made up of aluminum alloy, beautiful and strong, has a longer service time.
◆ Compatible for 110V/220V and 50HZ/60HZ
Main Technical Parameters
■ Stroke Length:0~300mm(adjustable)
■ Frequency of travel :5~95 times/min(adjustable)
■ Range of count: 0~9,999 times
■ Size of test plate: 430mm×150mm×0.03mm
■ Power of motor:25W
■ Power:110V~220V;50/60 Hz
■ Overall size: 500mm×460mm×280mm(L×W×H)
■ Capacity of Water Container:500ml×2
■ Ordering Information: BGD 528---Multifunction Abrasion Scrub Tester