- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Plastic Testing Equipment
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Vibration Meter
- Push Pull Gauge
- Data Logger / Data Logging Instrument
- Digital Tachometer
- Digital Handheld Stroboscope
- Laser Range & Angle Finder
- Laser Distance Meter
- Gauss Meter
- Inspection Mirror
- Welding Gauge
- Adhesion Tester
- Cable Length Measuring Device
- Refractometer
- Rotating Analysis
- TDS
- View All
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
chuin@redmarkindustry.com
Wet Abrasion Scrub Tester
Previous | 6 / 14 | Next |
BGD 526 Wet Abrasion Scrub Tester is the newest machine which is developed by Biuged . It can examine washability and related properties that affect the stain resistance of coatings. Detergent performance testing can also be determined in a reproducible manner.
It accords with standards such as ASTM D2486、ASTM D 3450、ASTM D 4213、ASTMD 4828、DIN EN 11330、EN ISO 11998 etc.
Feature:
◆ Running speed can be set to meet requirements of different standards.
◆ With four-digit counter, start the machine and it will automatically be stopped when reaching
set times.
◆ Compatible with a variety of abrasion pads to comply with different standards requirements,
such as ISO, ASTM, DIN etc..
◆ Quickly and easily to load and unload testing samples and replacing abrasion head.
◆ Can work normally under different voltage and frequency
◆ With stable and uniform running speed because of Push-rod design
◆ Features two brush holders for side by side testing
◆ Long service life with hard and durable design
◆ The whole machine body is made of anodized aluminum, having stable working status, repeat able test results, no exception even in the fastest speed of the stroke.
◆ With peristaltic pump design, control scrub medium flow accurately.
Main Technical Parameters
■ Stroke Length:300mm
■ Specification of brush:Nylon brush bristles in 5/4 pattern extending 19mm from block.
■ Weight of brush (including device holding brush):454±10 g(ASTM D 2486);135±1g(ISO 11998)
■ Frequency of travel :5~95 times/min(adjustable)
■ Range of count: 0~9,999 times
■ Size of test plate: 430×150×0.03mm
■ Power of motor:25W
■ Power:110V~220V;50/60 Hz
■ Overall size: 590mm×460mm×300mm(L×W×H)
■ Net Weight:27 KG
■ Capacity of Water Container:1L
■ Ordering Information:
BGD 526/1---Wet Abrasion Scrub Tester ( ASTM D 2486 )
BGD 526/2---Wet Abrasion Scrub Tester ( ISO 11998, no includes peristaltic pump )
BGD 526/3---Wet Abrasion Scrub Tester ( ASTM D 3450)
BGD 526/4---Wet Abrasion Scrub Tester ( ASTM D 4213 )
BGD 526/5---Wet Abrasion Scrub Tester (ASTM D 4828 )
BGD 526/6---Wet Abrasion Scrub Tester (DIN 53778)
BGD 527---Wet Abrasion Scrub Tester (ASTM D 2486& ISO 11998)
■ Optional Accessories:
BGD 1187---Abrasion Heads for ASTM D 3450(Sponge+ Weights, total weigh is 1,500g)
BGD 1188---Abrasion Heads for ASTM D 4213(Sponge+3M Scotch Brite handpads + Weights, total weigh is 470±
BGD 1189---Abrasion Heads for ASTM D 4828(Sponge+ Weights, total weigh is 1000±10g)
BGD 1191---Abrasion Heads for DIN 53778(Hog Bristle Brush+ Weights, total weigh is 250±10g)
BGD 1195---Abrasion Heads for ISO 11998(3M Scotch Brite handpads + Weights, total weigh is 135±1g)
BGD 1196---Abrasion Heads for ASMT D 2486(Nylon+ Weights, total weigh is 454±10g)
BGD 1197---Special Brush Carrier for Sponges Abrasion Heads
BGD 1045---Abrasive pad(3M Scotch Brite® handpads)(ISO 11998;Size---90×39mm; Pack of 50 pairs)
BGD 1364---Special nylon brush (ASTM D 2486;1 pair)
BGD 1365/A---Hog Bristle Brush(1 pair)
BGD 1510---Sponges (ASTM D 3450;12 pcs)
BGD 1511---Sponges (ASTM D 4213 & ASTM 4828 ;12 pcs)
BGD 2355---Brass Shim (165×12.7×0.25mm;pack of 10 pairs)
BGD 2208---Black plastic panel( 432×165×0.25mm;pack of 100 pcs)
Note:If choose BGD 1187, BGD 1188 and BGD 1189, then BGD 1197 is necessary