- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Plastic Testing Equipment
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Vibration Meter
- Push Pull Gauge
- Data Logger / Data Logging Instrument
- Digital Tachometer
- Digital Handheld Stroboscope
- Laser Range & Angle Finder
- Laser Distance Meter
- Gauss Meter
- Inspection Mirror
- Welding Gauge
- Adhesion Tester
- Cable Length Measuring Device
- Refractometer
- Rotating Analysis
- TDS
- View All
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+603-9054 6939
+6012-499 2103
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
+6013-399 2103
sales@redmarkindustry.comchuin@redmarkindustry.com
IPX9K High Pressure & Temperature Water Spray Chamber
Previous | 4 / 10 | Next |
IPX9K High Pressure & Temperature Water Spray Chamber
IPX9K High Pressure & Temperature Water Spray Chamber
IPX9K high pressure water spray test chamber is widely used in the electronics, military and consumer product industries. IPX9K is the highest rating currently available for water ingress protection in accordance with IEC 60529 and ISO 20653.
Products under test is subjected to high pressure (8000 – 10000 Kpa), high temperature (+80°C) and water jets at a flow rate of 14 – 16 L/min.
IPX9K steam jet cleaning chamber built with a water re-circulation system that reduced water use and a series of water pipes. Automatic water supply ensures adequate supply of water and automatic testing.
All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.
Characteristic
- IPX9K: protection against high pressure and temperature water jets
- Rotating turntable for specimens, turntable speed: 5 r/min ± 1 r/min
- Spray positions: 0, 30°, 60° 90°
- The test duration is 30 s per position
- Eliminates water consumption by circulation unit
- Waterproof power connector in the test room
- Automatic water supply
- Programmable color display touch screen controller
- USB and Ethernet
- A viewing window with wiper
- Internal illumination in test room
- Safety protection system
- CE mark
Specification : High Pressure & Temperature Water Spray Chamber
Model |
R9K-1200 |
Internal Dimensions (mm) |
1000*1200*1000 |
Overall Dimensions (mm) |
1250*1700*2050 |
Interior Volume (L) |
1200 |
Water Spray Angle |
0°, 30°, 60°, 90° |
Water Spray Temperature |
Ambient ~ +88¡æ (Adjustable) |
Spray Nozzle |
Four, 30 Seconds each position |
Distance from Water Spraying to Specimens |
10~15cm |
Water Pressure |
8000-10000 Kpa (Adjustable) |
Water Flow Rate |
14L-16L/min |
Testing Platform Speed |
5±1 r.p.m |
Testing Platform Height |
200-400 nm (Adjustable) |
Testing Platform Diameters |
600mm |
Heater Elements |
Nichrome heater |
Controller |
Programmable color LCD touch screen controller, Ethernet connection |
Door Lock |
Electromagnetic lock |
Water supply system |
Storage water tank; Booster pump; Automatic water supply; Water purification system; |
Safety Device |
Over-temperature Protection; Over-current Protection; |
Water Shortage Protection; Earth leakage Protection; Phase Sequence Protection |
|
Exterior Material |
Steel Plate with protective coating |
Interior Material |
SUS304 stainless steel |
Observation Window |
Double layer insulating glass with wiper |
Water Jet In Different Angles
- The samples can be placed at four angles (0 °, 30 °, 60 °, 90 °) for high temperature and high pressure water jetting test.
Fixing Device For Test Specimen
- When high-pressure water is sprayed, the test specimen on the turntable will be washed away from the turntable. We specially designed M6 screw holes with a spacing of 5cm and screws to fix the specimens.
Optional Equipment
- Optional equipment is available so that further standards and protection classes can be complied with, including ISO 20653, IPX1K to IPX6K, IPX1 to X8, SAE J 575, JIS D 0203, MIL STD 810.