- Color & Coating
- Environmental Testing Systems
- Temperature Humidity Chamber
- Ozone , Dust , Rain & Noxious Gas Chamber
- Accelerated Weathering Test Chamber
- Salt Spray Test Chamber
- Drying Oven
- Digital Thermometer
- Digital Temperature & Humidity Meter
- Infrared Thermometer
- Moisture Meter
- Anemometer
- Light Meter
- Sound Level Meter
- Particle Counter
- Vibration Machine
- Gas Detector
- Heater
- Others
- View All
- Material Testing
- Universal Testing Machine
- Charpy Pendulum Impact Tester
- BenchTop Hardness Tester
- Ultrasonic Thickness Gauge
- Portable Hardness Tester
- Shore Rubber & Plastic Hardness Tester
- Surface Roughness Tester
- Ultrasonic Flaw Detector
- Melt Flow Rate Meter (MFI)
- Sample Preparation Machine
- Asphalt & Bitument Testing
- Heat Stress Metter
- Plastic Testing Equipment
- Precise Measurement Solution Provider
- Rheometer
- View All
- Metrology Measuring System
- Portable Measuring & Testing Instruments
- Vibration Meter
- Push Pull Gauge
- Data Logger / Data Logging Instrument
- Digital Tachometer
- Digital Handheld Stroboscope
- Laser Range & Angle Finder
- Laser Distance Meter
- Gauss Meter
- Inspection Mirror
- Welding Gauge
- Adhesion Tester
- Cable Length Measuring Device
- Refractometer
- Rotating Analysis
- TDS
- View All
- Weighing & Metal Detection System
- Electronic & Electrical Testing Equipments
- Lab & Scientific Equipments
- Equipments for Food & Beverage Packaging
- Hot Wire Bottle Cutter
- Vacuum Leak Tester
- Pressure or Vacuum Gauge
- Secure Seal Analyzer
- CO2 Easy / CO2 Easy-DCO2 Measuring Device
- Burn Test
- Can And End Testing Equipments
- CO2 Measure
- Crown Cap Measure & Test
- Cutting Packaging
- Dimensional Measure
- Filtering
- Force Measure/Compresion/Dynamometers
- Stress Aplication
- Torque Measure
- Others
- View All
- Electric Vehicle Equipment
- Ion Fan
- Microscope
- Service Maintenance & Calibration
- Others
Redmark Industry Sdn Bhd
141-2, Jalan Radin Bagus, Bandar Baru Sri Petaling, 57000 Kuala Lumpur, Malaysia.
+6012-499 2103
Redmark Industry (Penang)
Sdn Bhd
7206, Mez Floor, Kompleks Perniagaan Pangsapuri Seri Cemerlang, Jalan Kampung Paya, Kampung Paya, 12200 Butterworth, Penang, Malaysia.
chuin@redmarkindustry.com
Semi-Automatic Impact Testing Machine (Charpy impact test)
Previous | 3 / 4 | Next |
Pendulum Impact Tester
Semi-Automatic Impact Testing Machine (Charpy impact test)
The machine you are describing is an impact testing machine designed for testing the impact resistance performance of metal materials under dynamic loads. Here are some key features and functions of this machine:-
Semi-Automatic Operation: The machine operates in a semi-automatic mode, meaning that certain aspects of the testing process are automated for efficiency and accuracy.
-
Microcomputer Screen Display: It features a microcomputer screen display, which likely provides a user-friendly interface for controlling and monitoring the testing process.
-
PC Microcomputer Control: The machine is controlled by a PC microcomputer, allowing for precise control and data collection during the testing process.
-
Sequential Operation: It can perform sequential operations, such as pendulum release, impact, measurement, and data display. This automation streamlines the testing procedure.
-
Digital Display: The machine can display relevant data digitally on the screen, making it easier to read and record test results accurately.
-
Printing Capability: It can print out test results, which is useful for documentation and analysis.
-
Efficiency: The machine is designed for high work efficiency, making it suitable for laboratories that conduct continuous impact tests or industries like metallurgy and machinery manufacturing that require a large number of impact tests.
-
Energy Recovery: After impacting the sample, the machine automatically uses the residual energy to lift the pendulum, preparing it for the next test. This feature minimizes manual intervention and speeds up the testing process.
-
Data Analysis: The computer can calculate and display various parameters, including material impact absorption energy, pendulum lifting angle, and average test values. This data is crucial for assessing the material's performance.
-
Remote Data Transmission: Depending on user requirements, the machine can also support remote data transmission, allowing test results to be shared or analyzed remotely.
In summary, this semi-automatic impact testing machine with microcomputer control offers a range of features that make it suitable for testing the impact resistance of metal materials with precision, efficiency, and data analysis capabilities. It finds applications in various industries, especially those requiring extensive impact testing, and can facilitate data management through remote data transmission.
The main body of the testing machine is a single-support column structure, cantilever beam hanging pendulum mode, and the pendulum is designed as a C-shaped pendulum body, which ensures the accuracy of the striking center and the accurate pendulum moment;
1.2. The impact knife is installed and fixed with screws, and the replacement is simple and convenient;
1.3. Equipped with safety protection pins and equipped with safety protection nets;
1.4. Microcomputer control, complete the whole process of taking the pendulum, impacting, automatically raising the pendulum, and re-impacting multiple tests according to the instructions.
1.5. The testing machine complies with the national standard GB/T3808-2002 ''Inspection of Pendulum Impact Tester'', and performs impact test on metal materials according to the national standard GB/T229-2007 ''Charpy Impact Test Method for Metal Materials''
2.Specifications:
1) Impact energy£º 300J¡¢ 150J
2) Scale range and division value£º
Energy range | 0¡«300J | 0¡«150J |
Division value per cell | 2J | 1J |
3) Pendulum moment£º | ||
Pendulum impact energy | 300J | 150J |
Pendulum moment | 160.7695N.m | 80.3848N.m |
4) Pendulum advance angle£º 150º
5) Distance from pendulum center to impact point (test center)£º 750mm
6) Impact velocity£º 5.2m/s
7) Span of sample support: 40mm
8) The arc radius at the end of the specimen support: 1¡«1.5mm
9) The inclination angle of the supporting surface of the specimen support: 0º
10) The arc radius of the impact knife: 2¡«2.5mm
11) Including angle of impact knife: 30º
12) Thickness of impact knife: 16mm
13) Specimen specification: 10×10×55mm
14) Weight of testing machine: about 450kg
15) External dimensions of the testing machine: 2124×600×1340mm
16) Power supply: three-phase four-wire system 50Hz 380V
17) Motor power: 380V 180W
18) The minimum resolution of computer display: 0.1J
19) Working conditions:
a) The room temperature is within the range of 10-35¡æ;
b) The relative humidity is not more than 85%;
c) In an environment without corrosive media and strong magnetic field interference;
d) Installed on a concrete foundation with a thickness of not less than 300mm or fixed on a foundation greater than 880 kg;
e) Adjust the level of the installation reference surface on the machine base to within 0.5/1000