Multi-angle spectrophotometer MS3006 Application: MS3006 Multi-angle spectrophotometer adopts Industrial-grade MCU with 6 measuring angles, which can provide accurate and consistent color measurement for metalllics, pearlescents and other complex special effect finished products. The smooth operating system and superior performance of the optical system allow the MS3006 multi-angle spectrometer to provide repeatability and reproducibility of Sparkle Grade(SG),Diffuse coarseness(DC) and Color Variation(CV) measurement. 3nh Multi-angle spectrophotometer MS3006 is used to measure the color difference for the surface paint which is affected by different viewing angles and viewing conditions. It can not only measure multi-angle color difference, but also measure and characterize special finishes through 6 measuring angles. Even in the curved surface, it also has high measuring accuracy and stability. Specification Parameters: Model MS3006 Measurement Geometry 6 measurement angles (6 illumination sources, 1 receivers) Measure Angle 45° Receiver： 45as-15°,45as15°,45as25°,45as45°,45as75°,45as110° Conform to the standards：ASTM D 2244,E 308,E 1164,E 2194, E2539,DIN 5033,5036,6174,6175-1,6175-2;ISO 7724, 11664-4 SAE J 1545 Application Provide accurate and consistent color measurement for metallic, pearlescent and other complex special effect color products Light Source Full spectrum LED light source with blue enhancement Lamp Life 5 years, 3 million times measurements Spectrophotometric Mode Concave Grating Sensor 256 Image Element Double Array CMOS Image Sensor Wavelength Range 400nm-700nm Wavelength Interval 10nm Measurement Range 0~600% Semiband Width 10nm Measuring Aperture Φ12mm Color Space CIE LAB,XYZ,Yxy,LCh,βxy,DIN Lab99 Color Difference Formula ΔE*ab,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*00, DINΔE99,ΔE DIN6175 Other Colorimetric Index Flop Index, Int-Em Observer Angle 2°/10° Illuminant D65,A,C,D50,D55,D75,F1,F2(CWF),F3,F4,F5,F6,F7(DLF),F8,F9,F10(TPL5),F11(TL84),F12(TL83/U30) Display Spectrogram/Values, Samples Chromaticity Values, Color Difference Values/Graph, PASS/FAIL Result, Color Offset, Color simulation, Sample effect value, Effect difference value Measuring Time Approx. 1 second for one angle Approx. 6 seconds for all angles Repeatability Spectral reflectance: Standard deviation within 0.08% Chromaticity value: ΔE*ab 0.03 ( When a white calibration plate is measured 30 times at 5 second intervals after white calibration) Reproducibility △E*<0.10,avg on the gray tile of BCRA tile set △E*<0.25,avg on the color BCRA tile set Inter-instrument Error 0.2ΔE*00(avg on reference Series II BCRA tile set) Effect Parameters Sparkle Grade(SG),Diffuse coarseness(DC) and Color Variation(CV) Effect Measurement 6 angles Sparkle Grade(SG),Color Variation(CV):15as-45°,15as-30°,15as-15°,15as15°,15as45°,15as80° 15d Diffuse coarseness(DC) Effect Repeatability Sparkle Grade(SG) Short-term repeatability: 0.12% (10 times standard deviations) (When a color plate is measured 10 times at 10 second intervals after white calibration) Diffuse coarseness(DC) Short-term repeatability:e0.09% (10 times standard deviations) (When a color plate is measured 10 times at 10 second intervals after white calibration) Effect Reproducibility Sparkle Grade(SG) Reproducibility: 1.9% (10 times standard deviations) (avg on reference Series II BCRA tile set) Diffuse coarseness(DC) Reproducibility: 1.4% (10 times standard deviations)(avg on reference Series II BCRA tile set) Trigger mode Pressure sensing trigger, button trigger, software trigger Measuring Mode Single measurement, average measurement (1-99), continuous measurement (1-99) Locating Mode Color camera preview Dimension L*W*H=195X83X128mm Weight About 1Kg Power lithium-ion battery, 3.7V,3200mAh, Continuous test 6000 times within 8 hours of full charge Display 3.5-inch TFT color LCD, Capacitive Touch Screen Interface USB, Bluetooth 5.0 Data Storage 1000 pcs Standards,4000 pcs Samples。 Language Simplified Chinese, Traditional Chinese, English Operating Environment 10℃ to 50℃, humidity does not exceed 85%, no condensation Storage Environment -20℃ to 50℃, humidity does not exceed 85%, no condensation Calibration Built-in white board parameters, external white board, black light trap, color board Calibration Interval 4 hours,8 hours,24 hours,Startup calibration Standard accessories Power Adapter, USB Cable, User Guide,PC Software(download from the official website), Calibration Board, black light trap,Protective cap, wristband Optional Accessory Micro-printer Notes Technical parameters are for reference only, subject to actual sales products.
read more
