Drawdown Plate provides an economical and convenient means for making drawdowns of uniform film thickness. It consists of a glass clipboard set firmly on a phenolic plastic panel. The entire apparatus is mounted on rubber supports is order to eliminate sliding while in use. The drawdown surface is 6.4mm thick polished glass, equal in planarity to finemirror glass. A steel clip holds the chart firmly while the drawdown is made. The workable area is equal to the size of the glass plate.    Easy to use and easy to clean Holds chartssecurely for drawdowns Helps to achieve uniform results       ■ Ordering Information：BGD 2608---Drawdown Plate（Glass plate size 299mm×381mm） read more

BIUGED supply a series of different viscosity standard oils which can bring convenience for calibrating your viscometers or flow cups. They are Newton liquid, with a perfect stability, hydrophobic and damp-proof. Good physical inertia and low surface tension. They can be kept and used fora long time.   Every bottle of standard oil has been calibrated by SOUTH CHINA NATIONAL CENTER OF METROLOGY, and comes with a calibration certificate report which calibrates dynamic viscosity (cP value）and kinematic viscosity（cSt value）, and has a very high reliability and accuracy.      Ordering    Information     Dynamic Viscosity               （cP） Kinematic Viscosity （mm2/s） Suitable for BGD 1600/1 5 5.4 ISO Flow Cup No.3 BGD 1600/2 50 52.1 Zahn Cup No.1；Ford Cup No.2 BGD 1600/3 100 104.2 Zahn Cup No.2；ISO Flow Cup No.4 Ford Cup No.3；Iwata Cup No.2（NK-2） BGD 1600/4 200 208.3 ISO Flow Cup No.5； DIN Flow Cup No.4；Ford Cup No.4 BGD 1600/5 500（67.2 KU） 520.8 Zahn Cup No.3 and No.4；ISO Flow Cup No.6 BGD 1600/6 1,000（86.3 KU） 1,052.3 Zahn Cup No.5；Krebs Stormer Viscometer BGD 1600/7 5,000 5,170.6 Rotary Viscometer BGD 1600/8 10,000 10,416.7 Rotary Viscometer BGD 1600/9 30,000 31,039.8 Rotary Viscometer BGD 1600/10 60,000 62,176.2 Rotary Viscometer BGD 1600/11 100，000 103,092.8 Rotary Viscometer whose range is over 100,000 cp BGD 1600/L 67.2 KU ---- Krebs Stormer Viscometer BGD 1600/M 86.3 KU ---- Krebs Stormer Viscometer BGD 1600/H 106.6 KU ---- Krebs Stormer Viscometer BGD 1600/T 121.5 KU ---- Krebs Stormer Viscometer Notice:  ① The tested value of below table is tested at 25℃ ② For every bottle standard oil, the fact viscosity value should be taken as final by calibration certificate report. ③ The period of validity for viscosity value of standard oil is one year, it should be recalibrated every year. read more

Biuged offer viscosity inspection kits which can finish viscosity measurement simply. Each kit contains a viscosity flow cup(Ford cup, ISO flow cup or Din cup), a cronometro, a stand, a container and a strong carrying case.     - Ordering Information：BGD 136---Viscosity Inspection Kits read more

Cone and Plate Viscometers Most of paint and coatings are non-Newtonian fluids, its viscosity would show typical changes when applied with roller, brush or spray gun under high shear rates. BGD 159 series Cone and Plate Viscometers designed by ISO 2884, ASTM D 4287 and BS 3900, can offer from 10,000S-1 to 12,000S-1 shear rates.   Features - 7 inch touch screen with powerful human-computer interactive interface and rich information, easy to operate - Interchangeable cones, simple to install and easy to clean - Choice of shear rate. Standard speeds include 750 and 900 rpm to provide shear rate at 10,000 sec 1. - only need small sample amount（< 1 mL）, simplifies testing - Build-in PT100 temp. probe - ARM chip processor and Gigabit Ethernet port ensure higher data processing speed and rapid& stable data transfer - New designed durable axle, anti-static shell and metal lifter - Come with heating and temp. control system, can set sample plate temperature from -5°C to120°C (L Type) or RT+5°C to 250°C (H Type) - Variety of viscosity units and auto switch between dynamic and kinematic viscosity - Calibration by user：temperature and correction factor protected by password                          How to choose your suitable Viscometer? 1. Specify one speed or shear rate if this is required for your method. 2. Indicate viscosity range. 3. Select the temperature range that best suits your application:  -5°C to120°C (L Type) or RT+5°C to 250°C (H Type) 4. Choose from 10 cones for multiple viscosity ranges   Main Technical Parameters Ordering Information  →   Parameters   ↓ BGD 159/1 （400 RPM）   BGD 159/2 （750 RPM）   BGD 159/3 （900 RPM）   BGD 159/4 （@5-1000 RPM）     Cone No.：CAP-01   Shear Rate：13.3N Sample Volume：67μL 47-469 mPa.s 25-250 mPa.s 20-208 mPa.s 20-37,500 mPa.s   Cone No.：CAP-02   Shear Rate：13.3N Sample Volume：38μL 90-938 mPa.s 50-500 mPa.s 40-417 mPa.s 37-75,000 mPa.s   Cone No.：CAP-03   Shear Rate：13.3N Sample Volume：24μL 180-1,875 mPa.s 100-1,000 mPa.s 80-833 mPa.s 75-150,000 mPa.s   Cone No.：CAP-04   Shear Rate：3.3N Sample Volume：134μL 300-3,750 mPa.s 200-2,000 mPa.s 170-1,667 mPa.s 150-300,000 mPa.s   Cone No.：CAP-05   Shear Rate：3.3N Sample Volume：67μL 600-7,500 mPa.s 400-4,000 mPa.s 300-3,333 mPa.s 300-600,000 mPa.s   Cone No.：CAP-06   Shear Rate：3.3N Sample Volume：30μL 1,500-18,750 mPa.s 1,000-10,000 mPa.s 800-8,333 mPa.s 750-1,500,000 mPa.s   Cone No.：CAP-07   Shear Rate：2.0N Sample Volume：1700μL 78-787 mPa.s N/A N/A 32-63,000 mPa.s   Cone No.：CAP-08   Shear Rate：2.0N Sample Volume：400μL 313-3,125 mPa.s N/A N/A 125-250,000 mPa.s   Cone No.：CAP-09   Shear Rate：2.0N Sample Volume：100μL 1,250-12,500 mPa.s N/A N/A 500-1,000,000 mPa.s   Cone No.：CAP-010   Shear Rate：5.0N Sample Volume：170μL 100-1,250 mPa.s N/A N/A 50-100,000 mPa.s NOTE:  1. ''N''=Rotor Speed 2. Each Ordering Information has two different types according to temperature range：-5°C to120°C (L Type) or RT+5°C to 250°C (H Type)  read more

Programmable Touch-screen Viscometers with Temperature Control combine viscosity measurement and temperature control in one machine. It break the current way to measure viscosity which need use thermostatic bath, viscometer and small amount sample adapter separately. Measuring sample's  viscosity change under different conditions is very useful for estimating its rheological behavior, while controlling sample temperature precisely is helpful for getting an accurate and comparable test result.The most obvious advantage of this machine is controlling sample temperature precisely during the whole test. Its temperature controlling system consists of semiconductor and a built-in automatic optimization progamme of temperature control. The temperature controlling precision can reach ±0.1℃. Operator can control sample temperature  not only by machine, but also by optional software, has a excellent flexible operation.     Features - Consists of 7 inch wide touch screen viscometer, small amount sample adapter（SSR）, cylindrical sample sleeve and SC4 rotor, tempeater controller. - BGD 157 can display shear rate and shear stress, can fulfil a precise measurement under a certain shear rate. - Only need 2ml～16ml sample，the cylindrical structure of SC4 rotor can offer a precise viscosity measurement - Electrical lifting and presice location, SSR is easy assembly and disassembly, convenient to clean. - SSR fits temperature controller closely, can ensure a precise constant temperature to sample. - Small amount sample, rotor stir action can minimize the non-uniformity of sample temperature, shorten greatly sample hydrothermal time. The other features of Viscometer are the same as Programmable Touch-screen Viscometer. Main Technical Parameters     Ordering Informationn  →             Parameters  ↓ BGD 156/TS （DV-Ⅰ） BGD 157/TS （DV-Ⅱ）     Measurement Range                  (mPa.s) BGD 156/TS1:  5-330K BGD 156/TS2:  50-3.3M BGD 156/TS3:  100-6.6M BGD 156/TS4:  400-26.4M BGD 157/TS1:  5-1M BGD 157/TS2:  25-10M BGD 157/TS3:  50-20M BGD 157/TS4:  200-80M R.P.M (per min) 0.3-100 0.1-200 Functions Measure   viscosity Measure   viscosity, shear rate, shear stress Software (Optional)    BGD 1607 Data collection and graphing    software        BGD 1608 Data collection and graphing      software Temp. Control Method Set single point temperature Rise temperature by programme Rotor Amount Standard： SC4-21#、27#、28#、29# （SC4-14、15、16、18、25、31、34 is optional） Sample 2-16ml Measurement Accuracy ±1.0% (of the full range) Repeatability ±0.5% (of the full range) Temperature Range -1℃～150℃（precision±0.1℃） Power Input： AC100-240V, 50Hz/60Hz；Output： DC17V 1.2A Package Weight 20 KG Package Size 490mm×360mm×600mm read more

We're a testing instrument equipment supplier company. we've been in business for 11 years . Our main office is located in Kuala Lumpur (KL) and our branch is located in Penang, Malaysia. Our main business is supply measuring & testing equipment. We supply a wide range of products such as  - Color & coating inspection systems - Environmental testing systems - Metrology dimensional measuring systems - Weighing & metal detection systems - Material testing equipment - Scientific lab equipment - Electrical & electronic testing equipment  - etc kindly contact us to get more information about our company.  Whatsapp/ Calls us : 012- 499 2103 ( Ameera) 013 - 515 2103 (Zulaikha) Email : Marketing@redmarkindustry.com / Sales@redmarkindustry.com #marketing #business #company #locatedkl #inbusiness #sales #branchkl #chamber #caliper #tensilemachine #manufacturingindustry #automation #automotivemanufacturing #foodindustry #pharmaceuticalindustry #Redmarkindustrynews read more

Every year on 16 September, Malaysia Day celebrated With lot of joys and commemorates.  The day also known as “Hari Malaysia”. It commemorates 16 September 1963, when the former British colony of Singapore and the East Malaysian states of Sabah and Sarawak, joined the Federation of Malaya to create the Malaysian Federation.   On that note, wishing  Happy Malaysia Day to all my dear connections ❤️   Love, Redmark Industry Sdn Bhd read more