IPX9K High Pressure & Temperature Water Spray Chamber IPX9K high pressure water spray test chamber is widely used in the electronics, military and consumer product industries. IPX9K is the highest rating currently available for water ingress protection in accordance with IEC 60529 and ISO 20653. Products under test is subjected to high pressure (8000 – 10000 Kpa), high temperature (+80°C) and water jets at a flow rate of 14 – 16 L/min. IPX9K steam jet cleaning chamber built with a water re-circulation system that reduced water use and a series of water pipes. Automatic water supply ensures adequate supply of water and automatic testing. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control. Characteristic IPX9K: protection against high pressure and temperature water jets Rotating turntable for specimens, turntable speed: 5 r/min ± 1 r/min Spray positions: 0, 30°, 60° 90° The test duration is 30 s per position Eliminates water consumption by circulation unit Waterproof power connector in the test room Automatic water supply Programmable color display touch screen controller USB and Ethernet A viewing window with wiper Internal illumination in test room Safety protection system CE mark Specification : High Pressure & Temperature Water Spray Chamber Model R9K-1200 Internal Dimensions (mm) 1000*1200*1000 Overall Dimensions (mm) 1250*1700*2050 Interior Volume (L) 1200 Water Spray Angle 0°, 30°, 60°, 90° Water Spray Temperature Ambient ~ +88℃ (Adjustable) Spray Nozzle Four, 30 Seconds each position Distance from Water Spraying to Specimens 10~15cm Water Pressure 8000-10000 Kpa (Adjustable) Water Flow Rate 14L-16L/min Testing Platform Speed 5±1 r.p.m Testing Platform Height 200-400 nm (Adjustable) Testing Platform Diameters 600mm Heater Elements Nichrome heater Controller Programmable color LCD touch screen controller, Ethernet connection Door Lock Electromagnetic lock Water supply system Storage water tank; Booster pump; Automatic water supply; Water purification system; Safety Device Over-temperature Protection; Over-current Protection; Water Shortage Protection; Earth leakage Protection; Phase Sequence Protection Exterior Material Steel Plate with protective coating Interior Material SUS304 stainless steel Observation Window Double layer insulating glass with wiper Water Jet In Different Angles The samples can be placed at four angles (0 °, 30 °, 60 °, 90 °) for high temperature and high pressure water jetting test. Fixing Device For Test Specimen When high-pressure water is sprayed, the test specimen on the turntable will be washed away from the turntable. We specially designed M6 screw holes with a spacing of 5cm and screws to fix the specimens. Optional Equipment Optional equipment is available so that further standards and protection classes can be complied with, including ISO 20653, IPX1K to IPX6K, IPX1 to X8, SAE J 575, JIS D 0203, MIL STD 810.
read more