PH-520 Features: * 1 to 3 points calibration with automatic recognition for conductivity standards. *Automatic electrode diagnosis shows the calibration points and factors *Selectable cell constant, reference temperature, line-near and pure water compensation modes. Automatic temperature compensation ensures accurate readings over the entire range Auto-Read function senses and locks the measurement endpoint *Setup menu allows setting the number of calibration points, temperature unit, auto-power off, etc. Reset function automatically resumes all settings back to the factory defaults *Expanded memory stores or recalls up to 100 data sets * USB communication interface for data transfer connecting a power adapter to meter PH-530/531/540 Features: * 1 to 5 points calibration with automatic recognition for conductivity standards. *Automatic electrode diagnosis shows the calibration points and factors *Selectable cell constant, reference temperature, TDS factor, linear and pure water compensations, seater and practical salinity measurement modes Automatic temperature compensation ensures accurate readings over the entire range. Auto-Read function senses and locks the measurement endpoint *Calibration due alarm prompts user to calibrate the meter regularly Auto-Pover Off effectively conserves battery life. *Setup menu allows setting the number of calibration points, stabilityteria temperature unit, date and time, etc. *Reset function automatically resumes all settings back to the factory defaults *Expanded memory stores or recalls up to 500 data sets * USB communication interface is easy to transfer data to PC. *Muls-mode powerscheme (batteries, power adapter and USB port) ensures that using the meter smoothly. Accessories: Meter, CON-1 conductivity electrode, temperature probe, standard solutions and carrying case. Specification  read more

Automotive Tester / Car Battery Tester PCE-CBA 10 Car battery tester for testing 12V starter batteries / LC display /Starter and charging circuit measurement / Robust design / Easy to use The automotive tester PCE-CBA 10 is a car battery tester and allows fast and easy testing of 12V voltage starting batteries. The automotive tester has various test modes to determine the condition of the car battery. The LC display of the automotive tester guides the user intuitively through the settings and various modes of operation. The automotive tester is suitable for car batteries of the type DIN, KIS, IEC, EN, GB, SAE and MCA. To test the battery, the automotive tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.  Highlight - LC display - Multilingual menu - For 12V starter batteries - Different test modes - Fast measurement - DIN, JIS, EN, IEC, SAE, GB & MCA standards Specification  Measurement object 12V starter batteries Battery standards DIN, JIS, IEC, EN, GB, SAE, MCA Test time 3 ... 10 s Cold start current CCA 100 ... 1700 A Battery capacity 30 Ah ... 100 Ah Display 2.4'' LC display Power supply 12V DC over test voltage Connection Kelvin terminals Dimensions 124 x 73 x 22 mm / 4.8 x 2.8 x 0.8 in Cable length ca. 100 cm / 39 in Weight ca. 250 g / 8.8 oz Delivery Scope 1 x Automotive Tester / Car Battery Tester PCE-CBA 10 1 x User manual read more

Electric Vehicle EV Tester / EV Test Instrument for charging plugs type 1 and 2 / PP and CP simulation / Shock-proof socket connection / Direct acceptance of all connections via laboratory plugs Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often, measuring devices are already available to perform the required measurements. An EV test instrument is therefore required so that the measuring device can be connected to the charging station. The EV test instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV test instrument. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EV test instrument has a shock-proof plug connection. The EV test instrument can be used to check the residual current device. A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces. The electric vehicle communicates with the charging station via the CP line (Control Pilot) and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EV test instrument is equipped with corresponding simulators. - CP and PP simulation - Transport bag included in delivery - Direct connection for wallboxes - Adapter with type 1 and type 2 charging plugs - PE conductor test - Integrated shock-proof socket Specification Functions   PE test (protective conductor) available, error PP simulation (charging cable coding)   open, 13 A, 20 A, 32 A, 63 A CP simulation (communication line) A, B, C, D, error Outputs (only for test purposes)   Measuring connections L1, L2, L3, N, PE   max. 250 / 430 V AC, 10 A   laboratory plug Schuko connection max. 250 V AC, 10 A Fuse from the Schuko connection fuse F 10 A / 250 V, 5 x 20 mm /  0.19 x 0.78'' CP signal output ± 12 V PWM     Further specifications   Input voltage 1 phase: 250 V AC / 3 phase 430 V AC,   50 / 60 Hz, max. 10 A     Charging cable connector Type 1 AC charging mode 3, compatible with IEC62196-1   Type 1 or SAE J1772 with vehicle connection   (Type 1, 5 pin, 1-phase)     Charging cable connector Type 2 AC charging mode 3, compatible with IEC62196-2   Type 1 or SAE J1772 with vehicle connection   (Type 2, 7 pin, 3-phase)     Measurement category CAT II 300 V Protection class IP54 Pollution degree 2 Operating conditions 0 ... 40 °C / 32 ... 104 °F, 10 ... 85% RH, non-condensing Storage conditions -10 ... 50 °C / 14 ... 122 °F, 10 ... 60% RH, non-condensing Maximum working height max. 2000 m / 6561 ft Dimensions (handheld only) 277 x 109 x 63 mm / 10.9 x 4.3 x 2.4'' Weight ca. 1 kg / 2.2 lb Delivery Scope 1 x EV Test Instrument PCE-EVSE 300 1 x Charging cable plug type 1 1 x Charging cable plug type 2 1 x Transport bag 1 x Instruction manual read more

Coating Thickness Gauge (Uee923) Explore our high-quality coating thickness measurement tools, utilizing both Magnetic Induction (Fe) and Eddy Current (NFe) technologies. Measure non-magnetic coating on magnetic metals and non-conductive coatings on non-magnetic substrates with precision. Benefit from PC connectivity, a built-in thermal printer, rechargeable battery, extensive memory, and versatile calibration options. Includes 5 calibration specimens and backed by a 3-year warranty and lifelong support Measuring Materials Magnetic Induction (Fe): Measuring the thickness of Non-magnetic coating on magnetic metal substrate, such as aluminum, chromium, copper, zinc, rubber, paint on the base of steel, iron, alloy and magnetic steel . Eddy Current (NFe): Measuring the thickness of Non-conductive coating on non-magnetic metal substrate, such as rubber, plastic, paint, oxide on the base of aluminum, copper, zinc, tin. Functions & Features High quality and precision Software for PC connection and data transmission, analysis, and printing measurement reports. With built-in thermal printer. Width of printer paper: 56.5±0.5mm. Rechargeable Li-ion battery, available for 10 hours working continuously. Large memory to save 4 types of materials and 1560 testing values. 3 ways for easy Calibration: by one specimen, two specimens or five specimens to finish calibration. Five statistics: Average, Max, Min, Testing times, Standard deviation. Standard delivery with 5 calibration specimens (48.5m、99.8m、249m、513m、1024m) 3 years warranty and life-long services Specification Model Uee923 Measuring  principle Magnetic induction (Fe ) & Eddy current ( NFe) Measuring range (µm) 0~1250μm Accuracy ±(1%H+1) μm    H refers to the thickness of testing piece Minimum resolution (µm) 0.1μm Min curvature of the min area (mm) Convex1.5   Concave9 Diameter of the min area (mm) Φ7 Critical thickness of substrate (mm) 0.5 Operating temperature 0℃~40℃ Memory 1560 Dimensions 238*90*38mm Weight 420g Printer Build-in High-speed Thermal Printer Power supply Rechargeable Li-ion battery   Main Machine,  probe*1(Fe or NFe), substrate*1(Fe or NFe), software & USB, Calibration specimens*5, Users’ Manual, Qualified Certificate, Paper for Printer,  Power Charger, Packing list, Warranty card Optional Accessories Probes, Specimens, Paper for printer PC Software Calibration  read more

LEEB - Ultrasonic Thickness Gauge Uee930 Functions & Features High quality and precision with 2 probes (Standard probe and Angle probe) Integrated with a 4mm calibration block. Two display units: mm and inch. With coupling state indication. Measuring sound velocity: according to the known thickness of the object, sound velocity of it can be measured directly. ●Software for PC connection and data transmission, analysis. 3 years warranty and life-long services Measuring Materials  Adapted to all kinds of materials which are good conductor of ultrasonic wave, such as metals(steel, cast iron, aluminum, copper and etc), plastic, ceramics, composites, epoxies, glass and etc Specification  Pictures read more