2
Share:
Protection against water from high pressure steam jet cleaners. High pressure and temperature water is jetted at an enclosure to test for ingress protection. IPX9K testing is the highest level of water ingress testing per the IP Code system.
Technical Parameters
Technical Parameters
| Model | IPX9k High Pressure Tester |
| Internal dimensions (mm) | 1000*1200*1000 D*W*H |
| Overall dimensions (mm) | 1250* 1700* 2050 D*W*H |
| Water Spray Temperature | ambient ~ 88℃ (Adjustable) |
| Water Spray Angle | 0°,30°,60°,90° |
| Spray Nozzle | Four, 30 seconds each position |
| Spray Range | 30° ± 5°(Single hole); Space 100-150mm |
| Distance from water spraying to specimens | 10~15cm |
| Water Pressure | 8000-10000 Kpa (adjustabl) |
| Water Flow Rate | 14L-16L/min |
| Testing Platform Speed | 5 ±1 r.p.m |
| Test Platform height | 200-450mm, adjustable |
| Test Platform diameters | 600mm |
| Load | ≤100kg |
| Controller | Programmable color display touch screen controller |
| PC Link with software, R-232 interface | |
| Pressure meter Alarm function | Power protection, timing (to be automatic stop), water protection, motor overheating protection, water temperature overheating automatic drainage, water function |
| Operating environment | Grading, no corrosive gas, avoid direct sunlight, etc Temperature: +5~+35 C; Humidity: 45～85％RH |
| Power Supply | 380V 50HZ, Three-phase five-wire |
Inquiry - IPX9k High Pressure Tester
