Share:
Key Features
- Automatic mould insertion and retraction on side table which allows cooling time before extraction without loss of compaction time (especially important for rubberized asphalt)
- 150mm and 100mm internal Ø moulds can be tested without changing parts
- Cold mix (emulsion) materials can be compacted and the expelled fluid collected
- Ethernet connection for data acquisition and control system
- User friendly LabVIEWTM software displays results in real time
- Machine calibrated with traceable equipment
- Option for mould up to 300mm high
- Compaction of asphaltic paving material to a target mixture density or void content
- Assessment of mixture compactibility
- SHRP Superpave asphalt mixture design
- Preparation of cylindrical test specimens
| Speed r.p.m | Normally 30 |
| Stress Kpa | Normally 600, Maximum 1000 (Dependant upon air pressure available) |
| Actuator Stroke mm | 250 |
| Internal Angle of Gyration | 0.2 to 2° |
| Compressed Air | 7-10 bar @ 350 L/min |
| Specimen Ø | 100mm and 150mm |
| Mixtures | Wet or Dry |
| Electrical Supply | 220-240Volts 50/60Hz @ 16A |
| Dimension mm (W x D x H) | 780 x 1000 x 1920 |
| Working Spae required mm (W x D x H) | 2000 x 2000 x 2200 |
| Estimated Weight Kg | 508 |
| PC | Included |
Inquiry - Gyratory Compactor
