3
Share:
Wire-wound Rods
The wire and its rod from the wire-wound rods are made of stainless steel，which are corrosion-resistance.
A coating（Paint or Ink）is being drawdown by a known thickness wire-rod applicator over a substrate（eg. Black/White Test Chart, Glass or Wood Panel, etc.）onto our Drawdown Board. The motion of the drawdown is done by gripping the 2 edges of the applicator or by using the Holder .
These applicators provide an economical way to assure the uniformity of thickness of very thin films.
A coating（Paint or Ink）is being drawdown by a known thickness wire-rod applicator over a substrate（eg. Black/White Test Chart, Glass or Wood Panel, etc.）onto our Drawdown Board. The motion of the drawdown is done by gripping the 2 edges of the applicator or by using the Holder .
These applicators provide an economical way to assure the uniformity of thickness of very thin films.
- Bar and wire manufactured of stainless steel
- Perfect for very thin films, e. g. foils and paper coating tests
- Ideal for flexible materials such as paper, cardboard, test charts, foils, leather, textiles, etc.
- Maximum attainable wet film thickness engraved on bar end
- Simultaneous drawdown of several samples side by side is possible
Main Technical Parameters
- Effective Wire-Wounding Length：200mm
- Bar Total Length：240mm
- Theoretical Wet Film Thickness（µm）available：6-8-10-12-15-20-25-30-40-50-60-80-100-120-150-200
- Bar Diameter：10mm
- Ordering Information：
BGD 212/6---6µm Wire-wound Rod
BGD 212/8---8µm Wire-wound Rod
………………….
BGD 212/150---150µm Wire-wound Rod
BGD 212/200---200µm Wire-wound Rod
BGD 1152---Holder for Wire-wound Rod
BGD 216---Wire-wound Rod set 4（includes any 4pcs different size wire bar coaters, a holder and a carrying case）
Inquiry - Wire-wound Rods
