2

Share:


Particle Counter PCE-AQS 2.5

Particle counter with RS485 interface / Particle size 2.5 µm / External sensor /
 Measuring range up to 999.9 µg/m3 / Fixed voltage supply / Mounting bracket /
 For monitoring environmental conditions / 12 V DC power supply

The particle counter is the ideal sensor for monitoring the fine dust content of the outside air. The particle counter reliably measures the mass concentration of fine dust of size PM 2.5 up to the measuring range end value of 999.9 µg/m³. The radiation protection of the particle external sensor enables measurements in particularly bad weather conditions. The sensor technology and other electronic components of the outdoor particle counter are protected from a wide range of weather conditions by the housing.

The measured value is sent via the RS485 data interface from the connected evaluation unit, depending on the query interval. This means that the particle counter can be connected directly to, for example, the in-house process unit for further processing.

- Modbus data transfer
- For measuring particle sizes of 2.5 µm
- Suitable for outdoor use
- Measuring range to 999.9 µg/m3
- Fixed power supply of 12 V DC
- Mounting device


Specifications

Measuring range 0.0 ... 999.9 µg/m3
Resolution 0.1 µg/m3
Measurement accuracy ±15 % ±10µg/m3 at 25 °C / 77 °F, 50% RH of measured value
Particle size PM 2.5
Smallest detectable particle 0.3 µm
Power supply 12 V DC
Output signal Modbus-RTU RS485
Sampling rate depends on the query rate
Max.pipe diameter for assembly    90 mm / 3.54''
Number of strands 4
Cable length 2.5 m / 8.2 ft
Ambient conditions -20 ... 60 °C / -4 ... 140 °F, 0 ... 70 % RH
Power consumption 350 mW
Overall dimensions Ø220 mm x 240 mm / 8.66'' x 9.44''
Weight 1221 g / 43 oz



 Inquiry - Particle Counter PCE-AQS 2.5